InstagramYouTubeLinkedInFacebook

diaphragm-pumps-dn12-dn15-dns1-15

Danese Srl · Arzignano · Since 1992 Diaphragm Pumps DN12, DN15 and DNS1-15 A technical comparison page to help you choose clearly between the historic DN12 pump, the DN15 that replaced it with higher capacity and immediate installation, and the new DNS1-15 / DN1S, a more modern and economical solution in daily use. Quick choice If you want to replace the old DN12 without modifying your plant, DN15 is the simplest solution. If you are willing to adapt the mounting holes in order to get a more modern pump with lower air consumption, DNS1-15 is the smartest choice. The [...]

Read More

LOADER 2 or 3 ways manipulator for hides

Danese Srl · Arzignano · Since 1992 Loader Hide Carrier for Tanneries The Danese Loader is an electro-pneumatic manipulator designed for the automatic loading and unloading of fleshing machines and presses for wet hides. A robust, easy-to-use solution built to improve efficiency in leather processing departments. See how the manipulator works How the Danese Loader works in the tannery Loader operating video in continuous loop Technical working sheet Here you can find the PDF explaining how the manipulator works. Open technical PDF Main advantages of the Loader for tanneries Reduced loading and unloading time. Higher hourly productivity in fleshing [...]

Read More

Danese Re-Brush® modular technical brushes for tannery machines. Replace only the bristles, keep the central core, reduce transport costs, downtime and waste.

Danese Re-Brush® — Modular Technical Brushes for Tannery Machines Danese Re-Brush® is a modular technical brush system designed for tannery machines, leather processing lines and industrial leather finishing equipment. The system allows the tannery to replace only the external bristle modules, while keeping the heavy central core in use. Modular brushes for leather processing and tannery machines In many tannery machines, brushes are heavy, expensive to ship and difficult to replace. Danese Re-Brush® solves this problem with a modular system: the central core remains in place and only the worn bristle sectors are replaced. This reduces transport weight, lowers [...]

Read More

Leather Softness Tester CALATI 300AST ISO17235

Calati 300AST Softness Tester for Leather, Synthetic Leather and Flexible Materials according to ISO 17235:2015 and IULTCS/IUP 36 The Calati 300AST is a professional softness tester for leather, hides, synthetic leather and flexible materials, commercialized by Danese Srl for laboratories, tanneries, quality control departments and companies working with technical materials. The instrument allows the softness of natural leather, hides, synthetic leather, non-woven fabrics and similar flexible materials to be measured in a simple, repeatable and documentable way. It is especially useful when softness should not be evaluated only by hand, but converted into a comparable value between batches, suppliers, articles [...]

Read More

TURNEX® Splitting Blades and Norton® Grinding Wheels for Industrial and Tannery Splitters

DANESE SRL Tannery Equipment TURNEX® Splitting Blades and Norton® Grinding Wheels Precision, consistency and long service life for leather processing TURNEX® is the Danese Srl brand dedicated to splitting blades for splitting machines. The range is designed for real tannery work, with technical control, reliability and stable cutting performance. We recommend the correct pairing with Norton® grinding wheels to achieve better blade-to-leather performance. The right combination can improve results significantly compared with incorrect matches. Why choose TURNEX® Clean and consistent cutTURNEX® blades are built for precision and continuity. Tannery and industrial useIdeal for leather, hide, rubber [...]

Read More

D6 CubeLifter : Spring-Loaded Pallet Lifting Platform

D6 CubeLifter: Mechanical Pallet Lifter for Ergonomic Manual Picking The D6 CubeLifter by Danese is a mechanical pallet lifter designed to improve operator ergonomics during manual picking operations from pallets. It helps keep the load at a more comfortable working height while the material is progressively removed from the pallet, reducing repeated bending and physical strain on the operator’s back, shoulders and arms. Developed from real industrial experience in tanneries, warehouses and production departments, the D6 CubeLifter is a simple, robust and long-lasting solution for companies looking for a fully mechanical pallet lifting system with no electricity, no hydraulics [...]

Read More

CARM the buffing paper

Danese Srl · Arzignano · Since 1992 CARM – Abrasive paper and abrasives for leather finishing CARM was created to work leather. Our abrasive paper, sanding paper and abrasive belts are developed for tanneries that need stable cutting, regular finishing and consistent results on leather. It is a brand designed for the leather industry, where abrasive performance must remain controlled, repeatable and reliable. Abrasive paper for tanneries and leather processing CARM products are used in finishing departments for buffing, sanding, grain correction and surface preparation. They are suitable for wet blue, crust, dry leather, nubuck production [...]

Read More

Hydraulic components at 360°

Not only hydraulic motors, adaptive bells, hydraulic pumps and spare parts in general and valves: the hydraulic material is made of many components that play a fundamental role in a hydraulic or hydraulic system. Hydraulic filters, Diaphragm tanks, Collectors for pressurization groups, Collectors for diathermic oil heating systems, flanges, pressure gauges must be chosen with care considering their reliability and functionality. From materials to construction technologies, each piece has strengths that affect the performance and longevity of a plant. The choice of the most suitable hydraulic components in line with the needs of the designer and installer is therefore facilitated [...]

Read More

eZipCut pneumatic scissors

eZipCut® EZ90 is the new pneumatic cutter designed to trim, in a swift and simple way, all types of hides after the fleshing process. “It’s easy. It’s zippy. eZipCut!” The “onomatopoeic” claim featured on the homepage of the website immediately puts in the limelight the core qualities and functions: eZipCut® is the new brand of pneumatic trimmers purposefully designed and developed to cut throughout the tanning process, as well as fabrics and other materials intended the fashion industry. Lightness, precision, speed, ease of use and of maintenance: these are the distinctive traits boasted by the whole range, the latter conceived [...]

Read More

Fleshway D-2 | Pompa per carniccio per scarnatura pelle

Danese Srl · Arzignano · Since 1992 FLESHWAY D-2 Fleshway D-2 is a fleshings pump designed to transport fleshing waste away from the fleshing machine, with no issues from height differences, bends or long distances. It is a practical solution for tanneries that want continuous production, high flow rates and no water during the fleshing stage. Built for real tannery work Fleshway D-2 is robust, easy to integrate and ideal for plants that need continuity, reliability and simple operation. Transport up to 200 meters With correct installation and proper piping. No water during fleshing Works continuously [...]

Read More
© Danese Srl | All rights reserved.
This site uses cookies to offer you a better browsing experience and works optimally only if cookies are enabled. By continuing to browse, you consent to the use of cookies.
OK
Go to Top