Find on our sitesProducts and catalogues · Danese, Calati, CARM, eZipCut

CALATI 300 AST: leather softness tester

The Calati 300AST is a professional softness tester for leather, hides, synthetic leather and flexible materials, supplied by Danese Srl for laboratories, tanneries, quality control departments and companies working with technical materials. The instrument allows the softness of natural leather, hides, synthetic leather, non-woven fabrics and similar flexible materials to be measured in a simple, repeatable way, with results that can be recorded. It is especially useful when softness should not be evaluated only by hand, but converted into a comparable value between batches, suppliers, articles or different productions. Leather softness tester according to ISO 17235:2015 and IULTCS/IUP 36 [...]

2026-11-12T07:15:36+00:00

eZipCut EZ90 pneumatic leather trimmer

eZipCut EZ90 is a pneumatic cutting tool developed for trimming hides, including after fleshing, and for cutting fabrics and other materials. Made in Italy, it draws on Danese’s experience in pneumatic cutting tools and micromechanics.Cutting and trimming in the tanneryThe tool is designed to support the operator during trimming and cutting operations. Its compact handling and sharpenable blade make it suitable for repeated work, with the configuration selected according to the material and production process.Blade, lubrication and constructionDecagonal blade for cutting and trimming operations.Self-lubricating system for the internal gear coupling.Stainless-steel details in the tool construction.A cutting-body option with a round [...]

2026-11-12T07:15:37+00:00

Vacuum Dryer Parts and Drying Optimisation

Physics working for leatherAn efficient vacuum dryer balances platen sealing, heat, suction and condensation. Danese supplies parts for multi-platen leather vacuum dryers and supports tanneries in assessing the cycle. The aim is controlled water removal while limiting thermal stress on leather.Vacuum dryer parts: meshes, pumps, valves and sealsHow vacuum drying worksLeather is spread on the heated platen. On closing, perimeter seals make the working chamber airtight; meshes and the cover form the upper assembly and allow vapour flow according to the machine design. The pump removes air and reduces absolute pressure. Water can then evaporate at lower temperatures than at [...]

2026-11-12T07:15:38+00:00

Conveyor belts and drive belts for tanneries

Danese supplies conveyor belts and drive belts for handling hides in tannery machinery. The correct replacement depends on the machine, the material being processed and the operating conditions.Materials and applicationsPVC, PU, rubber and siliconeConveyor belts in different materials, selected according to the process and machine requirements.Antistatic beltsSynthetic and cotton solutions for dedusting and brushing machines.Extractor beltsToothed belts with a double covering and resistance properties for lime and oil, to be checked against the required application.How to identify the correct beltTo check a replacement, send the machine make and model, belt width and overall length, material and thickness. For toothed belts, [...]

2026-11-12T07:16:02+00:00

Leather toggles: FITAI, IC and PN

Leather toggles secure hides to toggling frames during drying and stretching. Danese offers three families: FITAI® Type A, IC and plastic PN, selected according to the application and working conditions.Three toggle familiesFITAI® Type AA high-strength aluminium toggle with added Fitaina®. This range is designed for intensive use and durability, with a traditional wing-lever configuration.ICAn economical metal version, identified by its single lever. It is intended for standard applications where initial cost is a key selection criterion.Plastic PNA coloured toggle for acidic environments or valuable leathers, where reducing the risk of marks from aluminium oxidation is important. The colour makes it [...]

2026-11-12T07:16:02+00:00

Tannery Drum Spare Parts: Seals, Water Meters and Gearboxes

Keep your tannery drum working with the right replacement partDrums are used in many stages of leather production, from beamhouse treatments to tanning, retanning, dyeing and fatliquoring, depending on the process. Door sealing, water quantity and power transmission each play a part in daily operation. Danese supplies replacement parts for wear, leaks and maintenance requirements, starting by identifying the component fitted to your machine.Door seals: inflatable frames and continuous profilesA worn seal or an unsuitable section can affect door sealing. We supply closed-frame inflatable seals and continuous extruded sealing profiles supplied in rolls. Selection requires checking the section, dimensions and [...]

2026-11-12T07:16:02+00:00

Fleshing Machine Spare Parts: Blades, Abrasives and Rubber Inserts

Uniform fleshing starts with the parts in contact with the hideFleshing quality depends on the coordinated action of the blades, sharpening system and hide feed. The blades remove flesh, fat and tissue from the flesh side while preserving the hide structure. Rubber inserts guide the hide towards the working cylinder, while abrasives help keep the blades in suitable working condition.Danese supplies spare parts and consumables for tannery fleshing machines, selected according to the machine and production requirements.Fleshing blades: remove unwanted tissue, preserve the hideBlades are central to the fleshing machine. Their role is to detach and remove residual flesh and [...]

2026-11-12T07:16:02+00:00

Spare parts for leather splitting machines

Danese supplies spare parts for leather splitting machines and helps identify components according to the machine model.Frequently requested spare partsTURNEX splitting band knivesRing rollers and grooved transport rollersRubber-covered rollersCentral blade guidesBack plates and ring roller scrapersNorton grinding wheelsMechanical and electrical spare partsTURNEX band knives and Danese expertiseTURNEX originated in Germany in the 1960s, drawing on Dieter Graaf and Gottfried Both’s experience with TURNER machines. Danese acquired Turnex in 2004 and incorporated its know-how into the splitting knife range.The ground surface finish is designed to limit friction against blade guides and wear on the contact components. Knife and grinding wheel selection [...]

2026-11-12T07:16:02+00:00

CALATI decimal and centesimal leather thickness gauges

CALATI thickness gauges measure leather thickness during checks in tanneries and laboratories. The range includes decimal and centesimal readouts and digital versions: choose the model according to the measurement required.Decimal, centesimal and digital readoutsWhen selecting an instrument, consider the readout resolution, throat depth and contact characteristics. Display resolution is distinct from measurement accuracy: specify the model and inspection method for a technical assessment. The decimal analogue version uses a light-alloy bow protected by an epoxy powder coating, with delicate components made of stainless steel. The centesimal digital version provides a 0.01 mm readout. Depending on the contact selected, the instruments [...]

2026-11-12T07:16:03+00:00
Go to top