InstagramYouTubeLinkedInFacebook

diaphragm-pumps-dn12-dn15-dns1-15

Danese Srl · Arzignano · Since 1992 Diaphragm Pumps DN12, DN15 and DNS1-15 A technical comparison page to help you choose clearly between the historic DN12 pump, the DN15 that replaced it with higher capacity and immediate installation, and the new DNS1-15 / DN1S, a more modern and economical solution in daily use. Quick choice If you want to replace the old DN12 without modifying your plant, DN15 is the simplest solution. If you are willing to adapt the mounting holes in order to get a more modern pump with lower air consumption, DNS1-15 is the smartest choice. The [...]

2026-07-21T09:30:44+00:00
Read More

TURNEX® Splitting Blades and Norton® Grinding Wheels for Industrial and Tannery Splitters

DANESE SRL Tannery Equipment TURNEX® Splitting Blades and Norton® Grinding Wheels Precision, consistency and long service life for leather processing TURNEX® is the Danese Srl brand dedicated to splitting blades for splitting machines. The range is designed for real tannery work, with technical control, reliability and stable cutting performance. We recommend the correct pairing with Norton® grinding wheels to achieve better blade-to-leather performance. The right combination can improve results significantly compared with incorrect matches. Why choose TURNEX® Clean and consistent cutTURNEX® blades are built for precision and continuity. Tannery and industrial useIdeal for leather, hide, rubber [...]

2026-08-06T10:32:08+00:00
Read More

Tannery Toggles for Toggling Machines: FITAI® Type A, IC and PN Plastic Toggles

Tannery Toggles for Toggling Machines: FITAI® Type A, IC and PN Plastic Toggles Tannery toggles are small but essential components used on toggling machines in leather processing. They must hold the leather firmly, work reliably and resist the demanding conditions of the tannery environment. Danese keeps three main types of toggles for tannery toggling machines available from stock: the famous FITAI® Type A toggles, the economical IC toggles, and the colored PN plastic toggles. Each model has a clear purpose, depending on durability, budget, working environment and the type of leather being processed. In a tannery, choosing the right [...]

2026-06-30T15:02:10+00:00
Read More

spare parts splitting machines

Splitting Machines Our most requested spare parts for splitting machines are: splitting blades TURNEX TURNEX GMBH was born in Germany in the 60's and develops the technology on TURNER machines of two very prepared technicians Dieter Graaf and Gottfried Both. In 2004 Turnex was acquired by Danese srl, which, among all the historical know-how, found a particular method of manufacturing splitting blades, thanks to a particular surface, obtained with an exclusive grinding, allow a lower friction with blade guides and a lower wear of the same. This technology is now brought to the market by the TURNEX brand on our [...]

2024-05-02T06:42:02+00:00
Read More

Calati Thickness gauges decimal and centesimal

Decimal Analogue Thickness Gauge. The Calati analogue thickness gauge has been designed and built to allow you to make an exact and fast measurement of the thickness of the leather. To guarantee the long life of the instrument and the possibility of using it even in critical situations, the bow, built in light alloy, is protected with an epoxy powder paint while the more delicate parts are produced in stainless steel. Thickness Gauge Digital Centesimal. The Calati digital thickness gauge has been designed and built to allow you to make an exact and fast measurement of the thickness of [...]

2023-01-11T16:57:32+00:00
Read More
© Danese Srl | All rights reserved.
This site uses cookies to offer you a better browsing experience and works optimally only if cookies are enabled. By continuing to browse, you consent to the use of cookies.
OK
Go to Top